Replacement Chainsaw Chain 38LP13SB55KR
Kramp products represent excellent value for money. With this extensive budget range, it meets the demand for attractively priced products without compromising on quality. (For the equivalent Oregon chain – 91VXL055E – please click here. For the equivalent Oregon chain – 91PX055E – please click here.)
Low profile: Yes
Pitch: 3/8 Inch
Drive links thickness: .050 Inch
Drive links thickness: 1.3 mm
Number of drive links: 55
Bumper drive link: Yes
Chisel type: Semi chisel
Details
- Titanium-coated
- Chrome-plated semi-chisel cutters
- Centri-Lube
Application range
- Hobby gasoline chainsaws
- Electrical chainsaws
Properties
- Low kickback safety saw chain
- Extensive heat treatment
- High quality retail blister packaging
Technical info
- Safety chain / ANSI B175.1-202
- Approved by UL
Benefits
- Out-of-box sharpness
- Outstanding sawing performance
- Good lubrication
Replacement Chainsaw Chain 38LP13SB55KR
We recommend that you count the number of drive links in your old chain prior to ordering.
The three key chain measurements
These three measurements will give you all of the information you need to get the perfect replacement chainsaw chain for your chainsaw.
Pitch
To work out the pitch measurement you are going to need a tape measure. To get the correct size, simply count 3 rivets on the chain and measure the distance between them from the centre points. Now divide this by half to get your size. As an example, three rivets that measure ½ an inch across divided by two gives you a pitch of a ¼ inch. Make sure you check your chainsaw (on the guide bar) and the instruction manual for the measurements too, as these are typically located in one of these two places. (Replacement Chainsaw Chain Guide)
Gauge
This is the thickness of the drive links (the tooth-like underside of the chain that fits in the guide bar). The chain gauge is measured in inches and will usually be in the manual or on the chainsaw itself. As it is difficult to measure accurately with a tape measure, you may need a vernier caliper to get this measurement. There are four different gauge sizes, which are .043, 0.50, .058, .063, with the lower sizes being the most common. If you select the wrong size, it may be too thick to fit your chainsaw or too loose to gain proper traction. (Replacement Chainsaw Chain Guide)
Drive Links
This is the most mundane part of the measurement process, but also one of the most important. To get a chain that is the correct size you need to count the drive links (those little teeth on the underside of the chain). One tip is to place a strip of tape on the first link and count your way around. You need to know exactly how many there are to get the correct chain size for your chainsaw. Now you have those three numbers, you can begin your search for the replacement chainsaw chain that you need.
Reviews
There are no reviews yet